VP-773A - Using the Embedded Web Pages
Select the HDCP option for each HDMI input (see Section 6.2)
Set the gamma correction factor (see Section 6.5)
Set the error diffusion (see Section 6.5)
Set the native resolution for each input and then select the
color depth (see EDID Select in Section 6.2).
Select the EDID mode:
Native as Multiple Modelines – generating a group of
resolutions in the detailed timing, including the native
resolution), or
Native as Single Modeline – generating only the native
resolution in the detailed timing
Note that if auto switching is enabled, the Input Setting Web page is disabled and
the following message is displayed:
To Next Page
Loading...
