VS-62HA - Connecting the VS-62HA
5 Connecting the VS-62HA
Always switch off the power to each device before connecting it to your
VS-62HA. After connecting your VS-62HA, connect its power and then
switch on the power to each device.
To connect the VS-62HA as illustrated in the example in Figure 3:
Figure 3: Connecting the VS-62HA 6x2 HDMI/Audio Matrix Switcher
1. Connect up to six HDMI sources, (for example, a laptop, desktop, VIA
Connect PRO) to the HDMI In connectors.
2. Connect up to six analog audio sources, (for example, a laptop, desktop,
a Dante interface) to the AUDIO IN connectors. AUDIO IN 1 through 4
are unbalanced stereo on 3.5mm mini jacks. AUDIO IN 5 and 6 are
balanced stereo audio on 5-pin terminal block connectors.
To Next Page
Loading...
