VS-62HA - Operating the VS-62HA Remotely via the Web Pages
The VS-62HA allows you to program the general purpose buttons on remote
modules. The table shows the functionality defined for each button. The options
are:
HDMI, DP, DVI, PC—selects one of the inputs
Echo—allows a connected controller to be programmed to perform a
variety of tasked triggered by the user buttons, such as, room control,
(lights, screen, and so on)
Out 1—step-in current input to output 1
Out 2—step-in current input to output 2
Note: These settings are per input and remain valid even if the remote
SID-X3N is exchanged for another SID-X3N.
Up to three of the Echo, Out 1 and Out 2 buttons can be active at the same
time.
9.1.3 Using Test Patterns as Video Inputs
You can use one of six built-in, video test patterns as a video Input.
Figure 11: Test Pattern Tab
To Next Page
Loading...
