VS-62HA - Wiring the Twisted Pair RJ-45 Connectors
10 Wiring the Twisted Pair RJ-45 Connectors
Connect/solder the cable shield to the RJ-45 connector shield.
Do not use a crossed TP cable with this product.
Using a TP cable that is incorrectly wired may cause permanent
damage to the device
Do not use unshielded TP cables with this product
Figure 16 defines the TP pinout using a straight pin-to-pin cable with RJ-45
connectors.
Figure 16: TP Pinout Wiring
To Next Page
Loading...
