VS-62HA - Operating the VS-62HA Remotely via the Web Pages
9 Operating the VS-62HA Remotely via the
Web Pages
The VS-62HA can be operated remotely using the embedded Web pages. The
Web pages are accessed using a Web browser and an Ethernet connection.
Before attempting to connect:
Perform the procedures in Section 5.2
Ensure that JavaScript is enabled
Note: In the event that a Web page does not update correctly, clear your Web
browser’s cache (by pressing CTRL-F5).
To browse the VS-62HA Web pages:
1. Open your Internet browser.
2. Type the IP number of the device (see Section 5.2) in the Address bar of
your browser.
There are six Web pages:
Video Switching (see Section 9.1)
Analog Audio Switching (see Section 9.2)
EDID Management (see Section 9.3)
Authentication (see Section 9.4)
Device Settings (see Section 9.5)
Firmware Upgrade (see Section 9.6)
About us (see Section 9.7)
To Next Page
Loading...
