VS-62HA - Operating the VS-62HA Remotely via the Web Pages
To modify serial or Ethernet communication parameters:
1. Adjust the parameters as required, either by entering the parameters
directly or by using the drop-down list.
2. Click Set.
The changes are saved.
9.6 Firmware Upgrade Page
The Firmware Upgrade page lets you perform a firmware upgrade from a
firmware file.
Figure 14: The Firmware Upgrade Page
To upgrade the firmware:
1. Click Choose File.
The Windows Browser opens.
2. Browse to the required file.
3. Select the required file and click Open.
The firmware file name is displayed in the Firmware Upgrade page.
4. Click Start Upgrade.
The firmware file is loaded and a progress bar is displayed.
Do not interrupt the process or the VS-62HA may be damaged.
5. When the process is complete reboot the device.
The firmware is upgraded.
To Next Page
Loading...
