Kramer VS-62HA - 16 Messages and Codes; Device Initiated Messages; Result and Error Codes

76
VS-62HA - Messages and Codes
16 Messages and Codes
16.1 Device Initiated Messages
Command
Syntax
Start message
~nn@Protocol Start␍␊
Switcher actions:
Audio-video channel has switched (AFV mode)
~nn@AV␠in>out␍␊
Video channel has switched (breakaway mode)
~nn@VID␠in>out␍␊
Audio channel has switched (breakaway mode)
~nn@AUD␠in>out␍␊
16.2 Result and Error Codes
16.2.1 Syntax
In case of an error, the device responds with an error message. The error
message syntax:
~NN@ ERR XXX<CR><LF> - when general error, no specific command
~NN@CMD ERR XXX<CR><LF> - for specific command
NN - machine number of device, default = 01
XXX - error code