14.4 Entering Commands 45
14.5 Bidirectional Definition 45
14.6 Command Chaining 45
14.7 Maximum String Length 46
15 Protocol 3000 Commands 47
15.1 System Commands - Mandatory 48
15.2 System Commands 53
15.3 Switching/Routing Commands 61
15.4 Video Commands 64
15.5 Audio Commands 66
15.6 Communication Commands 68
15.7 EDID Handling Commands 72
15.8 Step-in Commands 75
16 Messages and Codes 76
16.1 Device Initiated Messages 76
16.2 Result and Error Codes 76
17 Packet Protocol Structure 78
17.1 Using the Packet Protocol 78
17.2 Calculating the CRC 79
18 Parameters 76
18.1 On/Off 76
18.2 Stage 76
18.3 Signal Type 76
18.4 Genlock Types 76
18.5 Video Port Type 77
18.6 Video Resolutions 77
18.7 Color Space 79
18.8 Image Properties 79
18.9 View Modes 79
18.10 Custom Resolution Parameters 80
18.11 Detail Timing Parameters 80
18.12 Video/Audio Signal Changes 80
18.13 Font Size 81
18.14 Layer Enumeration 81
18.15 Software Programmed 81
18.16 EDID Source 81
18.17 EDID Audio Capabilities 81
18.18 Signal Validation 82
18.19 Ethernet Port Types 82
18.20 HDCP Types 82
18.21 Parity Types 82
18.22 Serial Types 82
18.23 Audio Signal Types 83
18.24 Frequency Number 83
18.25 Audio Level 83
18.26 Audio Delay 84
18.27 IR Transmit Status 84
To Next Page
Loading...
