Kramer VS-62HA - Page 70

VS-62HA - Protocol 3000 Commands
65
Command – VID-PATTERN
Command Type – Video
Command Name
Permission
Transparency
Set:
VID-PATTERN
End User
Public
Get:
VID-PATTERN?
End User
Public
Description
Syntax
Set:
Set test pattern on output
#VID-PATTERN␠output_id,pattern_id␍
Get :
Get test pattern on output
#VID-PATTERN?␠output_id␍
Response
~ nn@VID-PATTERN␠output_id,pattern_id␍
Parameters
output_id - 1….num of system outputs
pattern_id - 1…num of system patterns
Response Triggers
After execution, response is sent to the com port from which the Set/Get was received
After execution, response is sent to all com ports if VID-PATTERN was set by any other external control
device (button press, WEB, device menu and similar)
Notes
Command - VMUTE
Command Type - Video
Command Name
Permission
Transparency
Set:
VMUTE
End User
Public
Get:
VMUTE?
End User
Public
Description
Syntax
Set:
Set enable/disable video on output
#VMUTE␠ output_id, flag␍
Get:
Get video on output status
#VMUTE?␠output_id␠ ␍
Response
Set / Get: ~ nn@ VMUTE␠output_id, flag␍␊
Parameters
output_id - 1….num of system outputs
flag - 0 - disable video on output
1 - enable video on output
2 - blank video
Response Triggers
Notes