3 Transport/Temporary Storage/Disposal
3.1 Checking the condition upon delivery
1. On transfer of goods, check each packaging unit for damage.
2.
In the event of in-transit damage, assess the exact damage, document it and
notify KSB or the supplying dealer (as applicable) and the insurer about the
damage in writing immediately.
NOTE
The pump set is supplied by the manufacturer/supplier in packaging which largely
prevents sagging or other damage during transport and/or storage.
3.2 Transport
WARNING
Improper transport
Risk of squashing hands and feet!
Damage to the pump set!
▷ Always transport the pump set in horizontal position.
▷ Do not use electrical cables for transport.
▷ Gently set down the pump set.
▷ Observe the centre of gravity of the pump set and the weights indicated.
WARNING
Pump set tipping over or rolling off
Risk of personal injury!
▷ Always secure vertically positioned pump sets against tipping over.
▷ Always secure horizontally positioned pump sets against rolling off.
WARNING
Ambient temperature below the specified minimum
Danger of frost!
▷ Never subject the pump set to ambient temperatures which are lower than
those permitted for the drinking water/antifreeze mixture provided (see section
on drinking water/antifreeze mixture / order documentation).
NOTE
Take into account the unequal weight distribution between pump and motor.
Transporting the transport boxes
Submersible borehole pumps are supplied in appropriate packaging, e.g. transport
boxes, containing either the pump set or the pump and/or motor as individual
components (depending on the design). Use suitable lifting equipment to transport
the transport box to the place of installation or storage. Observe the marking on the
long side of the transport box! This marking indicates the centre of gravity.
Transport boxes
3 Transport/Temporary Storage/Disposal
UPA, UPZ, BSX
11 of 64
To Next Page
Loading...
Need help?
General
