CONTROLS 6
15
6.5 Light switch
S00657-10
The light switch
1
is fitted on the left side of the handlebar.
Possible states
Low beam on – The light switch is turned downward.
In this position, the low beam and the tail light are
switched on.
High beam on – The light switch is turned upwards.
In this position, the high beam and the tail light are
switched on.
6.6 High beam flasher button
S00659-10
High beam flasher button
1
is fitted on the left side of the han-
dlebar.
Possible states
• High beam flasher button in the basic position
• High beam flasher button pressed – In this position, the
headlight flasher (high beam) is actuated.
6.7 Turn signal switch
S00658-10
Turn signal switch
1
is fitted on the left side of the handlebar.
Possible states
Turn signal off – Turn signal switch pushed toward the
switch housing.
Left turn signal, on – Turn signal switch pressed to
the left. The turn signal switch returns automatically
to the central position after use.
Right turn signal, on – Turn signal switch pressed to
the right. The turn signal switch returns automatically
to the central position after use.
6.8 Emergency OFF switch
S00661-10
The emergency OFF switch
1
is fitted on the right side of the
handlebar.
Possible states
Emergency OFF switch off – In this position, the igni-
tion circuit is interrupted, a running engine stops, and
a non-running engine cannot be started.
Emergency OFF switch on – This position is required
for operation; the ignition circuit is closed.
To Next Page
Loading...
