12 SERVICE WORK ON THE CHASSIS
52
12.7 Mounting the passenger seat
H01992-01
–
Attach hooks
1
on the passenger seat to seat mounting
2
on the subframe, and lower it at the rear while pushing for-
ward.
– Press the passenger seat downward until it clicks into place.
Warning
Danger of accidents The seat can come loose from the
anchoring if it is not mounted correctly.
– After assembly, check whether the seat is correctly
locked and cannot be pulled up.
– Finally, check that the passenger seat is correctly mounted.
12.8 Removing the front rider's seat
Preparatory work
– Remove the passenger seat. ( p. 51)
H01993-01
Main work
– Raise the rear of the front rider's seat, pull it towards the rear,
and remove it upwards.
12.9 Mounting the front rider's seat
H01994-01
Main work
–
Attach the front rider's seat in area
A
and lower at the rear.
– Finally, check that the front rider's seat is correctly mounted.
Finishing work
– Mount the passenger seat. ( p. 52)
To Next Page
Loading...
