16 COOLING SYSTEM
82
Condition
The engine is cold.
G05016-11
– Stand the motorcycle upright on a horizontal surface.
–
Check the coolant level in the compensating tank
1
.
The coolant level must be between MIN and MAX.
» If the coolant level does not match the specified value:
– Correct the coolant level.
Coolant ( p. 107)
G05017-10
–
Remove the radiator cap
2
and check the coolant level in the
radiator.
The radiator must be completely filled.
» If the coolant level does not match the specified value:
– Correct the coolant level and find out the cause of the
loss.
Coolant ( p. 107)
» If you had to add more coolant than the specified amount:
> 0.20 l (> 0.21 qt.)
– Fill/bleed the cooling system. ( p. 84)
– Mount the radiator cap.
16.3 Checking the antifreeze and coolant level
Warning
Danger of scalding During motorcycle operation, the coolant gets very hot and is under pressure.
– Do not open the radiator, the radiator hoses or other cooling system components if the engine or the
cooling system are at operating temperature.
– Allow the cooling system and the engine to cool down before you open the radiator, the radiator hoses
or other components of the cooling system.
– In the event of scalding, rinse the area affected immediately with lukewarm water.
Warning
Danger of poisoning Coolant is toxic and a health hazard.
– Keep coolant out of the reach of children.
– Do not allow coolant to come into contact with the skin, the eyes and clothing.
– Consult a doctor immediately if coolant is swallowed.
– Rinse the affected area immediately with plenty of water in the event of contact with the skin.
– Rinse eyes thoroughly with water and consult a doctor immediately if coolant gets into the eyes.
– Change clothing if coolant spills onto your clothing.
Condition
The engine is cold.
To Next Page
Loading...
