EasyManua.ls Logo

KTM 200 DUKE 2021 - Start Button; Ignition and Steering Lock; Locking the Steering

KTM 200 DUKE 2021
119 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6 CONTROLS
16
6.9 Start button
S00662-10
Start button
1
is fitted on the right side of the handlebar.
Possible states
The start button is in the basic position
The start button is pressed In this position, the starter
motor is actuated.
6.10 Ignition and steering lock
A00632-10
The ignition and steering lock is located in front of the upper triple
clamp.
Possible states
Ignition off OFF In this position, the ignition circuit
is interrupted, a running engine stops, and a non-
running engine will not start. The ignition key can be
removed.
Ignition on ON In this position, the ignition circuit is
closed and the engine can be started.
Steering locked In this position, the ignition circuit
is interrupted and the steering locked. The ignition
key can be removed.
6.11 Locking the steering
Note
Danger of damageThe parked vehicle can roll away or fall over.
Park the vehicle on a firm and level surface.
400732-01
Park the vehicle.
Turn the handlebar all the way to the left.
Insert the ignition key into the ignition and steering lock, press
in, and turn to the left. Remove the ignition key.
Steering is no longer possible.

Table of Contents

Related product manuals