15 ELECTRICAL SYSTEM
78
– Check the function of the electrical power consumer.
– Close the fuse box cover.
Finishing work
– Mount the passenger seat. ( p. 52)
15.6 Changing the headlight bulb
Note
Damage to reflector Grease on the reflector reduces the light intensity.
Grease on the bulb will evaporate due to the heat and be deposited on the reflector.
– Clean and degrease the bulbs before mounting.
– Do not touch the bulbs with your bare hands.
G04938-10
Main work
–
Remove screw
1
.
– Lift the headlight mask slightly and swing forward.
K00793-10
–
Remove protection cap
2
.
–
Unplug connector
3
.
K00794-10
–
Detach retaining clamp
4
.
–
Remove headlight bulb
5
.
– Position the new headlight bulb in the headlight housing.
Guideline
Insert the headlight bulb so that the holding lugs latch into
the recesses.
Headlight (H4/socket P43t) ( p. 102)
–
Attach retaining clamp
4
.
To Next Page
Loading...
