7 COMBINATION INSTRUMENT
22
7.3 Warnings
Info
All warnings that have occurred are shown automatically in
succession on the display until they are no longer active.
As soon as a malfunction occurs, the relevant indicator
lamps light up to signal that an indication/warning note for
the operating safety has been detected.
As soon as a warning for operating safety has been
detected, the general warning lamp also lights up.
As soon as several warnings pertaining to operating safety
have been detected, the general warning lamp also
flashes.
A00979-10
If a malfunction has occurred in the CAN bus, various warnings
appear on the display:
CAN ABS FAILURE, CAN FAILURE, and CAN EMS FAILURE can appear.
F01485-01
Side Stand Down appears on the display if the side stand is folded
down.
Clutch Switch Failure appears on the display if the clutch switch is
faulty.
A00971-10
Transport Lock appears on the display if transport mode is acti-
vated.
F01477-03
Low Oil Pressure appears on the display if the oil pressure is too
low.
Low Battery appears on the display if the battery voltage falls below
the specified value.
Battery voltage ≤ 10.5 V
To Next Page
Loading...
