SERVICE WORK ON THE ENGINE 18
91
S04242-10
–
Remove screws
3
. Take off oil filter cover
4
with the O-
ring.
–
Pull oil filter
5
out of the oil filter housing.
– Allow the engine oil to drain completely.
– Thoroughly clean the parts and the sealing surface.
S04244-10
–
Insert new oil filter
5
.
–
Oil the O-ring of the oil filter cover. Mount oil filter cover
4
.
–
Mount and tighten screws
3
.
Guideline
Screw, oil filter cover M6 10 Nm (7.4 lbf ft)
Info
Too little engine oil or poor-quality engine oil will result
in premature wear of the engine.
L02203-10
–
Remove filler plug
6
with the O-ring, and fill up with engine
oil.
Engine oil
Ambient tempera-
ture: 0 … 50 °C (32
… 122 °F)
1.5 l (1.6 qt.) Engine oil
(SAE 15W/50)
( p. 107)
Engine oil
Ambient tempera-
ture: −10 … 40 °C
(14 … 104 °F)
Engine oil
(SAE 10W/40)
( p. 108)
– Mount and tighten the filler plug together with the O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
– Always make sure there is sufficient ventilation
when running the engine.
– Use effective exhaust extraction when starting or
running the engine in an enclosed space.
– Start the engine and check for leaks.
Finishing work
– Fit the front spoiler. ( p. 57)
– Check the engine oil level. ( p. 90)
To Next Page
Loading...
