EasyManua.ls Logo

KTM 450 EXC - Adjusting the High-Speed Compression Damping of the Shock Absorber; Adjusting the Rebound Damping of the Shock Absorber

KTM 450 EXC
136 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10 SERVICE SCHEDULE 39
10.2 Service work (as additional order)
Annually
Every 135 operating hours/every 70 operating hours when used for motorsports
Every 45 operating hours
Once after 15 operating hours
Change the front brake fluid.
Change the rear brake fluid.
Change the hydraulic clutch fluid. ( p. 78)
Grease the steering head bearing. ( p. 62)
Clean the spark arrestor. (XCW) ( p. 67)
Perform a fork service. (EXC EU/AU, XCW)
Perform a fork service. (EXC Six Days)
Service the shock absorber.
Change the spark plug and spark plug connector.
Change the piston.
Check/measure the cylinder.
Check the cylinder head.
Change the valves, valve springs and valve spring seats.
Check the camshaft and cam lever.
Change the connecting rod, conrod bearing, and crank pin.
Check the transmission and shift mechanism.
Check the oil pressure regulator valve.
Check the oil pumps and lubrication system.
Check the timing assembly.
Change all engine bearings.
One-time interval
Periodic interval

Table of Contents

Related product manuals