EasyManua.ls Logo

KTM 450 EXC - Adding Engine Oil

KTM 450 EXC
136 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18 SERVICE WORK ON THE ENGINE 110
Danger
Danger of poisoningExhaust gases are toxic and inhaling them may result
in unconsciousness and/or death.
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without an
effective exhaust extraction system.
Start the engine and check that it is oil-tight.
Finishing work
(All EXC models)
Install the engine guard. ( p. 78)
Check the engine oil level. ( p. 107)
18.4 Adding engine oil
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
S00814-10
Main work
Remove the oil filler plug
with the O-ring from the clutch cover.
Fill engine oil to the middle
of the level viewer.
Add the same engine oil that was used when the motor was changed.
Engine oil (SAE 10W/50) ( p. 125)
Info
For optimal performance of the engine oil, do not mix different types of
engine oil.
If appropriate, change the engine oil.
Install and tighten the oil filler plug with O-ring.
Danger
Danger of poisoningExhaust gases are toxic and inhaling them may result
in unconsciousness and/or death.
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without an
effective exhaust extraction system.
Start the engine and check that it is oil-tight.
Finishing work
Check the engine oil level. ( p. 107)

Table of Contents

Related product manuals