13 BRAKE SYSTEM 87
100407-10
–
Check that leaf spring
in the brake caliper and sliding plate
in the brake
caliper support are seated correctly.
M00115-01
– Insert the new brake linings, insert the pin, and mount the cotter pins.
Info
Always change the brake linings in pairs.
– Operate the foot brake lever repeatedly until the brake linings are in contact with
the brake disc and there is a pressure point.
101380-10
–
Add brake fluid to level
.
Brake fluid DOT 4 / DOT 5.1 ( p. 125)
–
Mount screw cap
with membrane
and O-ring.
Info
Clean up overflowed or spilt brake fluid immediately with water.
To Next Page
Loading...
