To Next Page
J
Joel MedinaSep 6, 2025
What to do if time is not correctly displayed on KTM 690 SMC?
- SSean GarciaSep 6, 2025
If the time is not correctly displayed, it could be due to a blown fuse 2. In this case, change the fuse.
What to do if time is not correctly displayed on KTM 690 SMC?
If the time is not correctly displayed, it could be due to a blown fuse 2. In this case, change the fuse.
What to do if combination instrument shows nothing in the display on KTM Motorcycle?
If the combination instrument shows nothing in the display, it is likely due to a blown fuse 1. Replace the fuse.
What to do if speedometer in combination instrument is not functioning on KTM 690 SMC?
If the speedometer in the combination instrument is not functioning, it may be because the speedometer cable harness is damaged or the plug is oxidized. Have the cable harness and plug checked.
General| Bore x Stroke | 105 mm x 80 mm |
|---|---|
| Starter | Electric starter |
| Transmission | 6-speed |
| Lubrication | Forced oil lubrication with 2 oil pumps |
| Clutch | APTC slipper clutch, hydraulically actuated |
| Frame | Chromium-Molybdenum steel trellis frame, powder coated |
| Tires Front | 120/70 ZR 17 |
| Tires Rear | 160/60 ZR 17 |
| Steering Head Angle | 63.5° |
| Seat Height | 890 mm |
| Engine Type | 1-cylinder, 4-stroke engine |
| Fuel System | Electronic fuel injection |
| Cooling | Liquid cooled |
| Front Brake | Brembo four piston radial caliper, 320 mm disc |
| Rear Brake | Brembo single piston caliper, 240 mm disc |
| Wheels Front | 3.50 x 17" |
| Wheels Rear | 5.00 x 17" |
| Fuel Capacity | 13.5 l |
| Power | 55 kW (74 hp) |
| Wheelbase | 1, 480 mm ± 15 mm |
Explains symbols used in the manual for clarity and understanding.
Details typographical and other formats used within the owner's manual.
Defines the intended use of KTM sport motorcycles for road operation.
Highlights the importance of proper maintenance for performance and wear prevention.
Advises using only approved spare parts and accessories fitted by authorized workshops.
Illustrates and labels components visible from the front left side of the vehicle.
Illustrates and labels components visible from the rear right side of the vehicle.
Identifies the location of the chassis number stamped on the steering head.
Specifies the location of the engine number stamped on the left side of the engine.
Describes the function and adjustment of the clutch lever on the left handlebar.
Explains the operation of the light switch for low and high beams.
Details the components and functions of the vehicle's combination instrument.
Explains the location and function of the foot brake pedal for the rear brake.
Provides essential advice and warnings for initial operation of the motorcycle.
Details the recommended engine speed limits during the running-in phase.
Lists essential checks to perform before operating the motorcycle.
Guides the user through the process of starting the engine safely.
Provides instructions and warnings related to effective and safe braking.
Outlines critical maintenance tasks that must be performed by an authorized KTM workshop.
Instructions for safely jacking up the motorcycle for front and rear maintenance.
Details on adjusting compression and rebound damping for fork and shock absorber.
Procedure for checking and adjusting the motorcycle's chain tension.
Guidance on checking and topping up brake fluid levels for front and rear brakes.
Step-by-step instructions for removing and installing the front wheel.
Addresses faults where the engine does not start or turn over.
Diagnoses causes for engine overheating and lack of power.
Interprets FI warning lamp flashes for ignition pulse generator circuit issues.
Details FI lamp flashes related to throttle valve control unit voltage supply.
Provides instructions for safely cleaning the motorcycle, avoiding damage.
Recommendations for preparing and storing the motorcycle for extended periods.
Steps to follow to safely put the motorcycle back into service after storage.
Specifies the required capacities for engine oil and coolant.
Lists crucial tightening torque specifications for engine components.
Details the fuel tank capacity and reserve volume.
Lists the specifications for various lighting components on the motorcycle.
Specifies the required types and properties of brake fluid.
Details the required coolant type, mixture ratio, and specifications.
Recommends specific products for cleaning and lubricating the motorcycle chain.
Suggests contact spray for preventing electrical problems.
