Service: Machine configuration
Control box
Quantron S
55
$Service: Machine configuration
1. Service
The configuration of the control box through the
"Service" menu is required in following situations:
• New options are mounted on the machine.
• Old or broken equipment are removed.
• The control box is used on several machines.
The "Service" menu under "System-tests" requires a
password to avoid accidental changes of factory
settings.
- (1): The Quantron S control box is factory set for the
machine supplied.
- (2): This menu is reserved and accessible only by a
KUHN technician.
- (3): Access to factory settings menu
• Press Enter key.
• Save: The options installed by the user are stored.
• Recreate: The previous programmed machine
settings can be reinstalled.
- (4): The values stored in the total counters are reset.
Contact your authorised Kuhn dealer to get
the password.
The factory adjustments will be rewritten. The
previous machine settings will no longer be
possible
To Next Page
Loading...