Control box
24
Quantron S
Machine use
$Machine use
1. Adjustments before first use
- Make sure that all requested options are set on the
machine.
Proceed with the various pre-controls and adjustments
indicated in the operators' manual.
- Couple the machine to the tractor.
- Check if the electrical power cable of the control box
is connected.
- Check the connection between the machine 39-pin
wiring harness and the control box.
- Switch on the control box.
- Starting from the "main menu", select "hopper
configuration".
- Select the "Machine km/h" submenu.
- Check machine name.
Read the operators' manual before using the
machine.
To Next Page
Loading...