NOTICE
Damage to property due to overloading of the fork slots
Overloading the fork slots during transportation can cause damage to
property.
• Avoid overloading the fork slots through undue inward or outward
movement of hydraulically adjustable forks of the fork lift truck.
Fig. 6-3: Transportation by fork lift truck
Transportation with lifting tackle (optional)
The robot can also be transported using lifting tackle (>>> Fig. 6-4). For
this, it must be in the transport position. The lifting tackle is attached to
the robot at 3 points using lifting accessories approved for transport by
crane. All the legs must be routed as shown in the following illustration so
that the robot is not damaged. Installed tools and items of equipment can
cause undesirable shifts in the center of gravity. Items of equipment, espe-
cially energy supply systems, must be removed to the extent necessary to
avoid them being damaged by the legs of the lifting tackle during transpor-
tation.
All the legs are labeled.
The lifting accessories must be removed from the rotating column after
transportation.
WARNING
The robot may tip during transportation. Risk of personal injury and
damage to property.
If the robot is being transported using lifting tackle (optional), special
care must be exercised to prevent it from tipping. Additional safeguard-
ing measures must be taken. It is forbidden to pick up the robot in any
other way using a crane!
KR IONTEC
MA KR IONTEC V4 | Issued: 11.05.2021 www.kuka.com | 169/344
Transportation
To Next Page
Loading...
