Maintenance work
24
User's guide
Assembling the door
□ Hold the door with both hands at the lower part of the sides,
insert the hinge arms into their housings and let the door fall as
far as it will go.
□ Open the door fully.
□ Turn the latches back to their original position.
ATTENTION!
Make sure the door is inserted completely by turning the latches, because
otherwise it could block.
If the latches are hard to turn, use a fl at tool to turn them.
5.3. Dismantling/assembling the interior glass of the door
Depending on the model, your appliance may have 2, 3 or 4 panes of glass. Follow the instructions for the
type of door your appliance has.
Assembling
Depending on the model, your appliance may have a completely closed stainless steel door. With this door
it isn't possible to remove the panes of glass.
ATTENTION!
If dismantling the glass panes with the door fi tted in the oven, always do it
with the hinge in the locked position. If not, the door will close and the un-
mounted glass panes could break and cause injury.
To prevent this, dismantle the glass panes with the door removed, following the instructions in
the previous section.
To Next Page
Loading...
