Kuppersbusch CBD6550.0 - Rapid Heating

Operating the oven
58
User's guide
11.10.8 Changing the timer
□ Touch the symbol
.
□ Press the symbol (up) or (down) to set the desired
time. Confirm by pressing .
You will go to the Settings view. If you set or change the timer
during operation, you will be shown the process display.
After the programmed time has expired, a acoustic signal is emit-
ted, and the symbol fl ashes in the status bar.
□ Press
to stop the acoustic signal.
11.10.9 Deleting the timer
□ Touch the symbol
.
□ Press the symbol (up) or (down) to set 00:00 and confirm by pressing .
□ You go back to the initial screen.
INFO!
The timer setting does not depend on the cooking time and it has no infl uence on the cooking
process.
11.11. Rapid heating (has been activated as of the factory setting)
□ On the standby screen, touch and hold the rapid heating
symbol until a setup menu appears.
□ Press the symbol
(up) or (down) to set 00:00 in order
to switch the rapid heating function on and off in the baking
functions permitted by the oven .
□ Confirm by pressing
.
Your setting will remain until you make another change.