EasyManua.ls Logo

Kuppersbusch CBD6550.0 - Troubleshooting Specific Errors

Kuppersbusch CBD6550.0
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
What to do if …
User's guide
73
If ...
What to do?
... the door sealing is damaged?
Replace the door sealing See «Replacing the door sealing».
Do not use the oven when the door
sealing is damaged!
... the door sealing is damaged?
The oven can still be used. Replace the halogen lamp as quickly
as possible when the oven is cold. See «Replacing the oven
lamp».
...a powerful smell develops
Recycle the ökotherm
®
catalyst. See «Recycle the ökotherm
®
catalyst».
... the display will show F111
Insert the plug of the KT sensor as far as possible into the
socket
... an error code which is not on the
chart appears in the display
Switch the oven off and then on again using the safety fuse in
the home or the safety switch in the fuse box.
Contact Customer Service if the error code appears in the
display again.
... steam and condensation water are
deposited on food and in the inside of
the oven
Do not allow food to remain in the oven for more than 15 - 20
minutes after the cooking or baking process has ended.
... the steaming process does not start Check that the water tank is inserted correctly and that the
panel is closed.

Table of Contents

Other manuals for Kuppersbusch CBD6550.0

Related product manuals