Connecting the Antenna Data Cable
Connect the antenna data cable to the red and yellow ADCU
terminal strip connectors as shown in Figure 2-22.
Connecting the Antenna Power Cable
Connect the antenna power cable to the red ADCU terminal strip
connector as shown in Figure 2-23.
Installation
54-0161
33
A comprehensive wiring diagram of
the entire TracVision G6 system
has been provided for technical
reference in Appendix C on
page 129. A color quick reference
guide to wiring your TracVision
G6 has also been printed on the
inside front cover of this manual.
Figure 2-22
Antenna Data Cable
to ADCU Wiring
Remove any unused wires from the
Data Cable.
To Next Page
Loading...
Need help?
General
