Basic Operation
3-4
ID Card Copy
is printed on the
Program 1
key.
When the functions are deleted by overwriting
Program 1
key, seal the label supplied with the
machine and write the function name in it.
The procedure for using ID Card copying is explained below.
1
Press the
Copy
key when the
Copy
key/indicator
is off.
NOTE:
If the Message Display is turned off, press the
Energy Saver
key and wait for the machine to warm up.
2
Place the original on the platen.
Put the scanning side facedown in the center of
Statement or A5 size scanning area.
NOTE: For loading instructions, refer to Loading
Originals on page 2-65.
3
Press the
Program 1
.
The ID Card Copy function is recalled.
4
Press the
Start
key. Scanning begins.
5
Turn over the original on the platen and press the
Start
key.
6
After scanning all originals, press [End Scan] (the
Right Select
key) to start copying.
Registering Settings
After making settings, press and hold the one of the
Program 1
to
4
keys where you want to register the
settings for 3 seconds. The current settings are
registered to the selected program key.
To Next Page
Loading...
Need help?
General
