Kyocera ECOSYS M6026cdn Type B User Manual

Default Setting (System Menu)
8-178
8 Press the OK key. TCP/IP appears.
9 Press the  or  key to select [On] and then press
the
OK key.
Completed. is displayed and the screen returns to
the TCP/IP Settings menu.
10 Press the  or  key to select [Bonjour].
11 Press the OK key. Bonjour appears.
12 Press the  or  key to select [On] or [Off] and
then press the
OK key.
Completed. is displayed and the screen returns to
the TCP/IP Settings menu.
WSD Scan Setup
Select whether or not to use WSD Scan. The default setting is On .
Use the procedure below to setup the WSD-SCAN setting. The machine must be restarted after the setting is
changed.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [System/Network], and press the
OK
key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the
Right
Select
key).
TCP/IP: a b
*********************
2 On
1 *Off
Bonjour: a b
1 Off
*********************
2 *On
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[ Exit ]
3 System/Network
Login User Name: L b
*******************
Login Password:
[ Login ]

Kyocera ECOSYS M6026cdn Type B Specifications

General

Scan Resolution	600 x 600 dpi
Print Technology	Laser
Print Speed	26 ppm
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Copy Speed	26 ppm
Paper Capacity	250 sheets
Connectivity	USB 2.0
Memory	512 MB
Standard Interface	USB 2.0
Applicable OS	Windows
Scan Functions	Scan to Email
Mobile Printing	Yes