Kyocera ECOSYS M6026cdn Type B

Default Setting (System Menu)
8-184
Restart Network
After all network related settings have been done, restart the network card of the device. This is mandatory to
make the settings effective.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [System/Network], and press the
OK
key.
A login screen will appear. Then, enter the user ID
and password with administrator privileges to log
in, and press [Login] (the
Right Select key).
2 The System/Network menu appears.
3 Press the  or  key to select [Network Setting].
4 Press the OK key. The Network Setting menu
appears.
5 Press the  or  key to select [Restart Network].
6 Press the OK key. A confirmation screen appears.
7 Press [Yes]. (the Left Select key). The message
Restarting... appears and the network is restarted.
Pressing [No] (the
Right Select key) returns to the
Network Settings menu without restarting the
network.
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[ Exit ]
3 System/Network
Login User Name: L b
*******************
Login Password:
[ Login ]
System/Network: a b
*********************
2 Optional Network
3 NW InterfaceSend
[ Exit ]
1 Network Setting
Network Setting: a b
*********************
2 WSD-SCAN
3 WSD-PRINT
[ Exit ]
1 *TCP/IP Setting
Restart.
Are you sure?
[ Yes ] [ No ]