Kyocera ECOSYS M6026cdn Type B

Default Setting (System Menu)
8-156
6 Press the OK key. Err. Clear Timer appears.
7 Press the  or  key to set the Error Clear Timer.
Set the amount of time before clearing errors in
seconds. You cannot use the numeric keys to enter
this value.
8 Press the OK key. Completed. is displayed and the
screen returns to the Timer Settings menu.
Unusable Time
You can specify the prohibition period to use.
Use the procedure below to set the Unusable Time.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [Common Settings].
2 Press the OK key. The Common Settings menu
appears.
3 Press the  or  key to select [Timer Setting], and
press the
OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the
Right
Select
key).
4 The Timer Settings menu appears.
Err. Clear Timer: b
(5 - 495)
******30* sec.
Sys. Menu/Count.: a b
4 User/Job Account
5 User Property
*********************
[ Exit ]
6 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language
Login User Name: L b
*******************
Login Password:
[ Login ]
Timer Setting: a b
*********************
2 PanelReset Timer
3 Low Power Timer
[ Exit ]
1 Auto Panel Reset