Basic Operation
3-41
3
3
Place the original on the platen or in the document
processor, and press the
Start
key. Transmission
starts.
Specifying Destination
When specifying destination, choose from the Address Book or use the
One-touch
keys.
Choosing from the Address Book
Select a destination registered in the Address Book.
1
In the basic screen for sending, press the
Address
Book
key. The Select Addr Book menu appears.
NOTE: If external address book is not registered, [Ext
Address Book] is not displayed.
2
Press the or key to select [Address Book] and
then press the
OK
key. Address Book appears.
To use an address book on the LDAP server, select
[Ext Address Book].
3
Press the or key to select the desired user or
group, and then press the
OK
key.
If you select a user, the list of destinations
registered to the user appears.
If you select a group, proceed to step 5.
To Next Page
Loading...
