Kyocera ECOSYS M6026cdn Type B User Manual

Sending Functions
5-25
5
WSD Scan
WSD Scan saves images of originals scanned on this machine as files on a WSD-compatible computer.
NOTE: For information on operating the computer, refer to the operating system help for your computer.
To use WSD Scan, WSD Scan Setup (page 8-178) must be set to [On] in the network settings.
Installing the driver
1 Select Start button of the Windows display, and
then
Network .
2 Select the machine displayed Multifunctional
Devices, and then right-click
Install .
Installing of the driver starts.
3 After installing the driver, click Close .
Procedure using this machine
1 Press the Send key.
2 Place the originals on the platen or in the
document processor.
Displays the screen for sending.
NOTE: Depending on the settings, the address book
screen may appear. In this event, press [Cancel] to
display the screen for sending.
3 Press the  or  key to select [WSD Scan].
4 Press the OK key. WSD Scan appears.
5 Press the  or  key to select [From Oper. Panel].
Send to: a b
2 G Folder(SMB)
3 H Folder(FTP)
*********************
4 P WSD Scan
WSD Scan: a b
1 From Computer
*********************
[ Exit ]
2 From Oper. Panel

Kyocera ECOSYS M6026cdn Type B Specifications

General

Scan Resolution	600 x 600 dpi
Print Technology	Laser
Print Speed	26 ppm
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Copy Speed	26 ppm
Paper Capacity	250 sheets
Connectivity	USB 2.0
Memory	512 MB
Standard Interface	USB 2.0
Applicable OS	Windows
Scan Functions	Scan to Email
Mobile Printing	Yes