Kyocera ECOSYS M6026cdn Type B User Manual

Appendix-6
Optional Function
You can use the optional applications installed on this machine.
Overview of the Applications
The applications listed below are installed on this machine.
You can use these applications for a limited period on a trial basis.
• UG-33 (ThinPrint) (This application can only be activated in Europe.)
This application allows print data to be printed directly without a print driver.
NOTE: Restrictions such as the number of times the application can be used during the trial period differ
depending on the application.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [System], and press the
OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the
Right
Select
key).
2 The System menu appears.
3 Press the  or  key to select [Op Function].
4 Press the OK key. The Op Function menu
appears.
5 Press the  or  key to select desired application.
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[ Exit ]
3 System
Login User Name: L b
*******************
Login Password:
[ Login ]
System: a b
*********************
2 I/F Block Set.
3 Security Level
[ Exit ]
1 Network Setting
Op Function: a b
*********************
2 UG-33 T
[ Menu ]
1 ID-Card g

Kyocera ECOSYS M6026cdn Type B Specifications

General

Scan Resolution	600 x 600 dpi
Print Technology	Laser
Print Speed	26 ppm
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Copy Speed	26 ppm
Paper Capacity	250 sheets
Connectivity	USB 2.0
Memory	512 MB
Standard Interface	USB 2.0
Applicable OS	Windows
Scan Functions	Scan to Email
Mobile Printing	Yes