Kyocera ECOSYS M6026cdn Type B

Sending Functions
5-29
5
FTP Encrypted TX
This allows you to encrypt documents when you send them. If you select [On] in this option, you can then select
the encryption method in the basic send screen.
Use the procedure below to scan and send originals as encrypted files.
1 Press the Send key.
2 Place the originals in the document processor or
on the platen.
3 Press the Function Menu key. Function Menu
appears.
4 Press the  or  key to select [FTP Encrypted
TX].
5 Press the OK key. FTP Encrypted TX appears.
6 Press the  or  key to select [On] and then press
the
OK key.
Completed. is displayed and the screen returns to
the basic screen for sending.
NOTE: Click Security Settings -> Network Security in the Command Center RX. Be sure that SSL of
Secure Protocol Settings is On and more than two effective encryptions are selected in Clientside Settings .
For details, refer to the Command Center RX User Guide.
Function Menu: a b
*********************
2 Original Size T
3
Original Image T
[ Exit ]
1 Color Selection g
FTP Encrypted TX: a b
*********************
2 On
1 *Off