Copying Functions
4-22
Sharpness
Adjust the sharpness of image outlines. When copying penciled originals with rough or broken lines, clear
copies can be taken by adjusting sharpness toward [Sharpen]. When copying images made up of patterned
dots such as magazine photos, in which moire* patterns appear, edge softening and weakening of the moire
effect can be obtained by setting the sharpness toward [Unsharpen].
* Patterns that are created by irregular distribution of halftone dots.
Refer to the sample image in Appendix-24
.
Follow the steps below to adjust sharpness.
1
Press the
Copy
key.
2
Place the originals on the platen or in the
document processor.
3
Press the
Function Menu
key. Function Menu
appears.
4
Press the ļ² or ļ³ key to select [Sharpness].
5
Press the
OK
key. Sharpness appears.
6
Press the ļ² or ļ³ key to adjust the sharpness. A
larger negative value decreases the sharpness,
and a larger positive value increases the
sharpness.
7
Press the
OK
key.
Completed. is displayed and the screen returns to
the basic screen for copying.
8
Press the
Start
key to start copying.
To Next Page
Loading...
Need help?
General
