Kyocera ECOSYS M6026cdn Type B

Sending Functions
5-16
Adjusting Density
Use the procedure below to adjust the density when scanning the originals.
Part that is operated
The procedure for adjusting the density is explained below.
1 Press the Send key.
2 Place the originals on the platen or in the
document processor.
3 Press the Function Menu key. Function Menu
appears.
4 Press the  or  key to select [Density].
5 Press the OK key. Density appears.
6 Press the  or  key to select your desired
density.
7 Press the OK key.
Completed. is displayed and the screen returns to
the basic screen for sending.
8 Specify the destination, and press the Start key to
start sending.
Function Menu: a b
*********************
2 Original Size T
3
Original Image T
[ Exit ]
1 Color Selection g
Density: a b
4 w Lighter -1
*********************
6 z Darker +1
5 y Normal 0