Basic Operation
3-29
3
NOTE: If the screen for confirming the entry of a new
destination (page 8-77
) is set to [On], screens to
confirm the entered host name and path name appear.
Enter the same host name and path name again and
press the
OK
key on their respective screens.
Data to be entered are as follows.
NOTE: You will be unable to send the data if you forget your Login User Name or Login Password. Contact
your administrator and check your Login User Name or Login Password.
For send to folder (SMB)
For send to folder (FTP)
Item Data to be entered
Max.
characters
Host Name
(SMB)*
Host name or IP address of the PC to
receive the data.
Up to 64
characters
Path Share name
For example: scannerdata
If saving in a folder in the shared folder:
"share name\folder name in shared folder"
Up to 128
characters
Login User Name User name to access the PC
For example, abcdnet\james.smith
Up to 64
characters
Login Password Password to access the PC Up to 64
characters
* To specify a port number different from the default (445), enter using the format
“host name: port number” (e.g., SMBhostname: 140).
Item Data to be entered
Max.
characters
Host Name (FTP)* Host name or IP address of FTP server Up to 64
characters
Path Path for the file to be stored
For example, "User\ScanData".
If no path is entered, the file is stored in
the home directory.
Up to 128
characters
Login User Name FTP server log-in user name Up to 64
characters
Login Password FTP server log-in password Up to 64
characters
* To specify a port number different from the default (21), enter using the format “host
name: port number” (e.g., FTPhostname: 140).
To Next Page
Loading...
Need help?
General
