Document Box
6-18
12
The number of copies screen appears. Set the
number of copies and press the
OK
key.
13
The file print confirmation screen appears. Press
[Yes] (the
Left Select
key).
Accepted
appears and
printing begins.
Quick Copy mode
This mode is used to print an additional copy of a document that has already been printed. If a document is
printed with Quick Copy selected in the printer driver, the document will be simultaneously stored on the SSD.
The required number of copies can be printed whenever needed from the operation panel. If more documents
than the set maximum are stored, the oldest job will be overwritten each time a new job is stored. When the
machine power is turned off, jobs stored in this mode are erased. For the number of documents that can be
stored in Quick Copy mode, see Quick Copy Jobs on page 8-97
.
1
Press the
Document Box
key. The Document Box
menu appears.
2
Press the ļ² or ļ³ key to select [Job Box].
3
Press the
OK
key. The Job Box menu appears.
4
Press theļ² or ļ³ key to select [Quick Copy].
5
Press the
OK
key. The user selection menu
appears.
6
Press the ļ² or ļ³ key to select the user.
To Next Page
Loading...
Need help?
General
