Kyocera ECOSYS M6026cdn Type B

Default Setting (System Menu)
8-78
6 Press the OK key. The menu of the selected
function appears.
The screen when the Check before Send menu is
selected is shown.
7 Press the  or  key to select the desired
function.
8 Press the OK key. Completed. is displayed and the
screen returns to the destination confirmation
menu.
Default Screen
Set the default screen displayed when you press the Send key.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [Send].
2 Press the OK key. The Send menu appears.
3 Press the  or  key to select [Default Screen].
4 Press the OK key. The Default Screen appears.
5 Press the  or  key to select [Destination] or
[Address Book].
6 Press the OK key. Completed. is displayed and the
screen returns to the Send menu.
Check beforeSend: a b
*********************
2 On
1 *OFF
Sys. Menu/Count.: a b
7 Copy
8 Printer
*********************
[ Exit ]
9 Send
Send: a b
*********************
2 DestinationCheck
3 Default Screen
[ Exit ]
1 Select Key Set.
Default Screen: a b
*********************
2 Address Book
1 *Destination