Kyocera ECOSYS M6026cdn Type B

Default Setting (System Menu)
8-147
8
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the
Right
Select
key).
4 The Timer Settings menu appears.
5 Press the  or  key to select [Auto Panel Reset].
6 Press the OK key. Auto Panel Reset appears.
7 Press the  or  key to select [Off] or [On].
8 Press the OK key. Completed. is displayed and the
screen returns to the Timer Settings menu.
Panel Reset Timer
If you select [On] for Auto Panel Reset , set the amount of time to wait before Auto Panel Reset . Options are
between 5 and 495 seconds (every five seconds). The default setting is
90 seconds.
NOTE: If you select [Off] for Auto Panel Reset , the time display does not appear.
Use the procedure below to set the reset time.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [Common Settings].
Login User Name: L b
*******************
Login Password:
[ Login ]
Timer Setting: a b
*********************
2 PanelReset Timer
3 Low Power Timer
[ Exit ]
1 Auto Panel Reset
Auto Panel Reset: a b
1 Off
*********************
2 *On
Sys. Menu/Count.: a b
4 User/Job Account
5 User Property
*********************
[ Exit ]
6 Common Settings