Default Setting (System Menu)
8-163
8
11
Press [Yes] (the
Left Select
key). This makes a
connection with the entered destination.
If the connection is successful,
Connected.
is
displayed on the screen. Press [OK] (the
Right
Select
key).
Completed.
is displayed and the
folder (SMB/FTP) address is registered.
If the connection failed,
Cannot connect.
is
displayed. Press [OK] (the
Right Select
key). The
screen shown in step 2 reappears. Check and re-
enter the destination.
Address Number
Address Number is an ID for a destination. When creating a new destination, the smallest unused address
number is automatically allocated. You can select any available number out of 200 numbers for individuals and
50 numbers for groups.
1
Press the or key to display Address Number.
2
Press [Edit] (the
Right Select
key). An entry
screen appears.
3
Press the or key or the numeric keys to enter
the address number.
4
Press the
OK
key. The address number is
registered.
NOTE: If you enter an address number that is already
registered, the screen will display
This address
number is already registered.
and return to the screen
of step 2.
To Next Page
Loading...
