Default Setting (System Menu)
8-189
8
9 Press the ļ² or ļ³ key to select [HTTP/HTTPS] or
[HTTPS only].
10 Press the
OK
key.
Completed.
is displayed and the
screen returns to the Secure Protocol menu.
LDAP Security
Select the communication protocol according to the type of security employed by the LDAP server. The default
setting is
Off
.
The table below shows the available settings.
* You can change the port number using Command Center RX.
Use the procedure below to make the setting.
1
In the Sys. Menu/Count. menu, press the ļ² or ļ³
key to select [System/Network], and press the
OK
key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the
Right
Select
key).
2
The System/Network menu appears.
3
Press the ļ² or ļ³ key to select [Network Setting].
Item Description
Off Do not use security employed by the LDAP server.
SSL/TLS Encryption is applied any data communication. To enable LDAP security, the
LDAP port may have to be changed according to the server settings.
Typically, 636* for SSL/TLS is well-known LDAP port.
STARTTLS Encryption is applied any data communication. Typically, 389* for
STARTTLS is well-known LDAP port.
To Next Page
Loading...
Need help?
General
