Copying Functions
4-10 OPERATION GUIDE
9 Press the U or V key to select the desired border
line type and then press the OK key.
10
Press the U or V key to select the orientation of
the original and then press the OK key.
Completed. is displayed and the screen returns to
the basic screen for copying.
11
Press the Start key. Scanning begins.
If the original is placed on the platen, replace the
original and press the Start key.
After scanning all originals, press [End Scan] (the
Right Select key) to start copying.
NOTE: Press the Reset key to reset the settings
selected in Function Menu.
To Next Page
Loading...
