Kyocera FS-1024MFP

Default Setting (System Menu)
OPERATION GUIDE 8-55
8
Copy Settings
The following settings are available for copying functions.
• Photo Processing …8-55
• ID Card Copy …8-56
• Select Key Set …8-57
Photo Processing
Set the resolution for copying a photo.
Use the procedure below to set Photo Processing.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Copy].
2 Press the OK key. The Copy menu appears.
3 Press the U or V key to select [Photo Processing].
4 Press the OK key. Photo Processing appears.
5 Press the U or V key to select [Dithering(Normal)]
or [Dithering(Rough)].
6 Press the OK key. Completed. is displayed and the
screen returns to the Copy menu.
Item Description
Dithering(Normal) Sets the resolution to standard.
Dithering(Rough) Sets the resolution to low.
Sys. Menu/Count.: a b
4 Administrator
5 Common Settings
*********************
[ Exit ]
6 Copy
Copy: a b
*********************
2 Select Key Set.
[ Exit ]
1 Photo Processing
Photo Processing: a b
*********************
2 Dithering(Rough)
1 *Dithering(Normal)