Kyocera FS-1024MFP

Default Setting (System Menu)
OPERATION GUIDE 8-69
8
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Report].
2 Press the OK key. The Report menu appears.
3 Press the U or V key to select [Report Print].
4 Press the OK key. The Report Print menu appears.
5 Press the U or V key to select [Menu Map] or
[Status Page].
6 Press the OK key. A confirmation screen appears.
The screen shown is the one when Status Page is
selected.
7 Press [Yes] (the Left Select key). The selected
report is output. Accepted. is displayed and the
screen returns to the Report Print menu.
NOTE: When acceptance of jobs is prohibited, Print, storing functions are restricted now. is displayed and the
output is canceled.
Service Status Page
More detailed information is available than on the Status Page. Service personnel usually print the service status
pages for maintenance purpose.
Use the procedure below to print a Service Status.
Sys. Menu/Count.: a b
*********************
2 Counter
3 System
[ Exit ]
1 Report
Report: a b
*********************
2 Admin Rpt Set.
3 Result Rpt Set.
[ Exit ]
1 Report Print
Report Print: a b
*********************
2 Status Page
[ Exit ]
1 Menu Map
Print.
Are you sure?
z Status Page
[ Yes ] [ No ]