Kyocera FS-1024MFP

Preparation before Use
OPERATION GUIDE 2-7
2
Setting Date and Time
Follow the steps below to set the local date and time at the place of installation.
Set the date, time and time difference from GMT of the region where the machine is used.
NOTE: Be sure to set the time difference before setting the date and time.
1 Turn on the main power switch.
2 Press the System Menu/Counter key on the main
unit operation panel.
3 In the Sys. Menu/Count. menu, press the U or V
key to select [Common Settings].
4 Press the OK key. The Common Settings menu
appears.
5 Press the U or V key to select [Date Setting], and
press the OK key.
6 A login screen will appear. Then, enter the login
user name and password with device administrator
privileges to log in, and press [Login] (the Right
Select key).
The default setting of login user name and
password is 2400.
Sys. Menu/Count.: a b
3 System
4 Administrator
*********************
[ Exit ]
5 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language
Login User Name: L b
********************
Login Password:
[ Login ]