Kyocera FS-1024MFP

Scanning Image to USB
6-8 OPERATION GUIDE
Storing Size
Select the sending size (the size of image to be stored).
The table below lists the sizes.
Relationship between Original Size, Storing Size, and Zoom
Original Size (page 6-4), Sending Size, and Zoom (page 6-10) are related to each other. Refer to the following
table.
NOTE: When you select Storing Size that is different from Original Size, and select the Zoom [100%], you can
send the image as the actual size (No Zoom).
Use the procedure below to select the size when storing scanned images.
1 Press the Scan to USB key.
2 Press the U or V key to select [Store File].
3 Press the OK key. The basic screen appears.
4 Place the originals on the platen.
5 Press the Function Menu key. Function Menu
appears.
6 Press the U or V key to select [Storing Size].
Item Detail Size
Standard
Sizes
Select from Same as Original
Size or Standard Size.
Same as OrigSize, Legal, Letter, Statement, Executive,
Offcio II, A4, A5, A6, B5, B6, Folio and 16K
Others Select from envelope or
postcard.
ISO B5, Envelope #10, Envelope #9, Envelope #6,
Envelope Monarch, Envelope DL, Envelope C5
Original Size and the size you wish to
send as are
the same different
Original Size Specify as necessary Specify as necessary
Storing Size Select [Same as OrigSize] Select the required size
Zoom Select [100%] (or [Auto]) Select [Auto]
Function Menu: a b
*********************
2 Original Size T
3
Original Image T
[ Exit ]
1 Color Selection T