Kyocera FS-1024MFP

Scanning Image to USB
OPERATION GUIDE 6-15
6
File Format
Select the file format of the image to send. The table below lists the file formats and their details.
NOTE: You cannot select [JPEG] if [Black and White] is selected for the color mode.
Use the procedure below to select the file format for transmission.
1 Press the Scan to USB key.
2 Press the U or V key to select [Store File].
3 Press the OK key. The basic screen appears.
4 Place the originals on the platen.
5 Press the Function Menu key. Function Menu
appears.
6 Press the U or V key to select [File Format].
7 Press the OK key. File Format appears.
8 Press the U or V key to select the file format from
[PDF], [TIFF], [XPS] or [JPEG].
If Full Color or Grayscale has been selected for the
color mode for scanning, press [Detail] (the Right
Select key) and select the image quality.
File Format Adjustable range of image quality Color mode
PDF 1 Low Quality (High Comp.) to 5 High Quality
(Low Comp.)
Full Color, Grayscale, Black and White
TIFF 1 Low Quality (High Comp.) to 5 High Quality
(Low Comp.)
Full Color, Grayscale, Black and White
XPS 1 Low Quality (High Comp.) to 5 High Quality
(Low Comp.)
Full Color, Grayscale
JPEG 1 Low Quality (High Comp.) to 5 High Quality
(Low Comp.)
Full Color, Grayscale
Function Menu: a b
*********************
2 Original Size T
3
Original Image T
[ Exit ]
1 Color Selection T
File Format: a b
*********************
2 TIFF
3 XPS
[ Detail ]
1 *PDF